HP ImageREt 2400, Ultraprecise toner, HP edge-enhancement
HP PCL 6, HP PCL 5c, HP postscript level 3 emulation, Hybrid print path
Black and white: up to 12 pages per minute
Color: up to 8 pages per minute
First page out
As fast as 25.5 seconds
As fast as 31.5 seconds
Monthly duty cycle
Up to 30,000 sheets of paper
Duty cycle is the maximum number of pages per month of printed output. This value provides a comparison of product robustness in relation to other HP products, and enables appropriate deployment of printers and MFPs to satisfy the demands of connected individuals or groups.
Recommended monthly print volume
250 - 1000 sheets of paper
HP recommends that the number of printed pages per month be within the stated range for optimum device performance, based on factors including supplies replacement intervals and device life over an extended warranty period.
Duplex printing (printing on both sides of paper)
Manual (driver support provided)
Memory card specifications
The HP Color LaserJet CP1515n does not support memory cards.
Maximum recommended number of files on a memory card
Maximum recommended individual file size
Approaching any of the recommended maximums on a memory card might slow the performance of the product.
Supported memory card types
CompactFlash Type 1 and 2
Memory Stick Duo
Memory Stick Pro
Other memory cards, including Memory Stick Magic Gate Duo, Memory Stick Duo, and Secure Multimedia Card, are supported with the use of an adapter. See the instructions that came with your memory card for more information.
The following tables contain the power specifications for the product.
Power requirements are based on the country/region where the printer is sold. Do not convert operating voltages. Doing so might damage the printer and void the product warranty.
100 to 127 V (+/-10%)
50 to 60 Hz (+/-2 Hz)
220 to 240 V (+/-10%)
50 to 60 Hz (+/-2 Hz)
Minimum recommended circuit capacity
The following information contains the environmental specifications for the product.
Recommended operating conditions
17 to 25 °C (62.6 ° to 77 °F)
15 to 30 °C (59 to 86 °F)
20% to 60% relative humidity (RH)
10% to 80% RH
0 to 3048 m (0 to 10,000 ft)
This product is designed to reduce power consumption and save natural resources without compromising product performance. It has been designed to reduce total energy consumption both during operation and when the device is not active. This product qualifies for ENERGY STAR®, which is a voluntary program established to encourage the development of energy-efficient office products.
ENERGY STAR is a U.S. registered service mark of the U.S. EPA. As an ENERGY STAR partner, HP has determined that this product meets ENERGY STAR guidelines for energy efficiency.
For more information, go to the Energy Star website (in English).
This product generates no appreciable ozone gas (O3).
Paper and plastic use
This product is suited for the use of recycled paper according to DIN 19309 and EN 12281:2002. Plastic parts over 25 grams (0.88 ounces) are marked according to international standards that enhance the ability to identify plastics for recycling purposes at the end of product life.
HP offers an increasing number of product return and recycling programs in many countries and regions, and partners with some of the largest electronic recycling centers throughout the world. HP conserves resources by reselling some of its most popular products. For more information about the recycling of HP products, go to www.hp.com/go/recycle (in English).
The following information contains the regulatory specifications for the product.
Exposure to radio frequency radiation
The Center for Devices and Radiological Health (CDRH) of the U.S. Food and Drug Administration has implemented regulations for laser products manufactured since August 1, 1976. Compliance is mandatory for products marketed in the United States. The device is certified as a “Class 1” laser product under the U.S. Department of Health and Human Services (DHHS) Radiation Performance Standard according to the Radiation Control for Health and Safety Act of 1968. Since radiation emitted inside the device is completely confined within protective housings and external covers, the laser beam cannot escape during any phase of normal user operation.