600 dpi: This setting provides 600 x 600 dpi output with Resolution Enhancement technology (REt) for improved text.
FastRes 1200: This setting provides 1200 dpi effective output quality.
EconoMode: Text prints using less toner. This setting is useful when printing drafts. Turning this option on is independent of other print-quality settings.
8000 single-sided pages per month (maximum)
1000 single-sided pages per month (average)
Power requirements are based on the country/region where the printer is sold. Do not convert operating voltages. Doing so might damage the printer and void the product warranty.
100-127 V (+/-10%)
50/60 Hz (+/- 2 Hz)
220-240 V (+/- 10%)
50/60 Hz (+/- 2 Hz)
Rated current for the HP LaserJet P1500 Series
Power consumption (average in watts)
HP LaserJet P1500 Series
Power reported is the highest value measured for monochrome printing using all standard voltages.
Because of the instant-on fusing, both the default time (Ready mode to PowerSave mode) and the recovery time (PowerSave mode to start printing) is negligible (less than ten seconds).
Maximum heat dissipation for all models in Ready mode = 62 BTU/Hour
Recommended operating conditions
Recommended operating temperature range: 17.5°C to 25°C (63.5°F to 77°F)
Maximum operating conditions
Allowable operating temperature range: 10°C to 32.5°C (50°F to 90.5° F)
Humidity: 10% to 90% (no condensation)
Operating (storage) temperature range: 0°C to 40°C (32°F to 104°F)
Energy usage drops while in Energy Star mode. This saves natural resources and saves money without affecting the high performance of this product. This product qualifies for Energy Star, a voluntary program established to encourage the development of energy-efficient office products.
Figure : Energy Star
Energy Star is a U.S. registered mark of the U.S. EPA. As an Energy Star partner, Hewlett-Packard Company has determined that this product meets the Energy Star guidelines for energy efficiency. For more information, click here to go to the Energy Star Web site. (www.energystar.gov) (in English)
Material safety data sheets
Click here to get the Material safety data sheets (MSDS).
This product generates no appreciable ozone gas (O3).
Paper and plastic use
This product can use recycled paper according to DIN 19309. Plastic parts over 25 grams are marked according to international standards. This enhances the ability to identify plastics for recycling purposes at the end of the printer's life.
HP offers an increasing number of product return and recycling programs in many countries/regions. HP partners with some of the largest electronic recycling centers throughout the world. HP conserves resources by reselling some of its most popular products. The HP Web site has more information on www.hp.com/go/recycle.
The HP Printer meets product requirements from regulatory agencies in your country/region.
This equipment has been tested and found to comply with the limits for a Class B digital device, according to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy. If it is not installed and used in accordance with the instructions, it might cause harmful interference to radio communications. However, there is no guarantee that interference does not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try correcting the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between equipment and receiver.
Connect equipment to an outlet on a circuit different from that to which the receiver is located.
Consult a dealer or an experienced radio/TV technician.